Special Tools Required
- 51 0 330 SIDE WINDOW INSTALLATION AID (DOOR)
- 51 0 341
- 51 0 342
- 51 3 010 SUCTION LIFT (2X)
- 51 3 080 TOOL
- 51 3 240 SPANNER
- 51 3 300 SPECIAL TOOL FOR DOOR WINDOW GLASS ADJUSTMENT
- 51 3 301
- 51 3 303
- 51 3 304
Prerequisite:
- Vehicle must be standing on its wheels on a level floor
- Front door correctly adjusted to fit
- Close soft top if necessary
IMPORTANT:
When closing, the door window glass must not jam on the trim strip in any area of the window (window glass breakage).
If necessary, incoming check:
The following incoming check must be carried out prior to every adjustment operation:
NOTE:
Incoming check must be carried out with the window cavity cover strip fitted.
- Denormalize power window
- Measure retraction depths with special tool 51 3 080
- Insert special tool 51 0 341 in rotary striker and close rotary striker
- Measure pretension with special tool 51 0 342
- Initialize power windows
Necessary preliminary tasks:
- Denormalize power window
- Remove outer window cavity cover strip (not for checking pretension)