51 31... Instructions On Gluing Windscreen: Assembly
To prevent a pressure increase in the vehicle interior when the doors are closed:
- Open a window
1-day system:
After the adhesive bead has been applied, the window glass must be fitted within 5 to 10 minutes (depending on air humidity, temperature and use of accelerator).
After 5 to 10 minutes the adhesive bead forms a skin which can no longer guarantee a perfect bond.
To secure the windscreen, use only the yellow plastic adhesive tape (sourcing reference: BMW Parts Service, part number 83 19 9 410 979).
The glass will slip down if other adhesive tapes are used.
Windscreen slippage will result in leaks and wind noises.
1-hour system:
Once the adhesive bead has been applied, the windscreen must be installed within 7 minutes (depending on air humidity, temperature).
After 7 minutes the adhesive bead forms a skin which can no longer guarantee a perfect bond.
To secure the windscreen, use only the yellow plastic adhesive tape (sourcing reference: BMW Parts Service, part number 83 19 9 410 479).
The glass will slip down if other adhesive tapes are used.
Windscreen slippage will result in leaks and wind noises.
Remove adhesive residue immediately with adhesive remover (Sika remover 208, sourcing reference: BMW Parts Service). Do not press out the window glass again.
Hardened adhesive can only be removed by machine.
Check height of windscreen/rear window with special tool 51 0 010 TEST GAUGE FOR WINDSCREEN AND REAR WINDOW INSTALLATION or 51 3 210 .
Assemble car.