LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 135i 2D Convertible, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body Equipment - Repair (E88) >> Floor/Luggage/Engine Compartment Panel >> 51 47 491 Removing And Installing/Replacing Rear Underbody Protection >> Two-Part Underbody Protection

Two-Part Underbody Protection

Release screws (1).

Detach underbody protection (2) from bracket (3) and remove.

Installation: 

Ensure correct seating.

Centre underbody protection (2) and tighten down screws (1).

Fig 1: Removing Underbody Protection
G04726249Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals