LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 135i 2D Convertible, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body Equipment - Repair (E88) >> Floor/Luggage/Engine Compartment Panel >> 51 47 491 Removing And Installing/Replacing Rear Underbody Protection >> Single-Part Underbody Protection (Except E90/E91/E92 AWD)

Single-Part Underbody Protection (Except E90/E91/E92 AWD)

Release screws (1).

Pull underbody protection (2) in direction of arrow out of bracket (3).

Installation: 

Ensure correct seating.

Centre underbody protection (2) and tighten down screws (1).

Fig 1: Pulling Underbody Protection
G04726248Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals