Checking Retraction Depth

NOTE: 2 items of special tool 51 3 080 are required for adjustment of retraction depths.

Fig 1: Identifying Special Tool 51 3 080 On Door Window Glass

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Values serve only to check adjustment in the Z-direction.

Measure retraction depth (A) in areas (1 and 2).

Measurement (A):

(1) 8 ± 2 mm

(2) 10 ± 2 mm

If necessary, check or readjust settings on:

Door window glass
Side window

Fig 2: Identifying Retraction Depth
Courtesy of BMW OF NORTH AMERICA, INC.