51 37 000 Removing And Installing/Replacing Complete Rear Left Or Right Power Window Unit: Notes
WARNING:
Risk of injury!
Power window unit has no anti-trapping mechanism.
Necessary preliminary tasks:
- Remove lower section of side trim at rear
- Remove outer window cavity cover strip
- Remove inner window cavity cover strip
Release screws (1).
Tightening torque, see 51 37 4AZ in 51 37 SIDE WINDOWS, ELECTR. ACTUATED .
Release or feed out cable holders (2) and remove connecting bracket (3) towards top.
Release screw (1).
Tightening torque, see 51 37 3AZ in 51 37 SIDE WINDOWS, ELECTR. ACTUATED .
Release trim (1) from catches (2) and remove.
Carefully feed out power window unit (3) in upward direction.
Disconnect associated plug connection and remove complete power window unit (3).
Installation:
Ensure trim (1) is correctly seated.