Basic fittings for mobile phone Business E60, E61, E63, E64, E87, E90: Introduction

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2005 BMW 645Ci, 2005 BMW 545i, 2005 BMW 530i, 2005 BMW 525i, and 2004 BMW 645Ci. However, it is still accessible from the selected car via links, so may be relevant.

Option 633 "Basic fittings for mobile phone Business" offers the best possible comfort and maximum customer benefit for using the telephone in the car.

The basic fitting for mobile phone Business is only available in conjunction with one of the following equipment specifications:

RAD2: BMW radio "Professional"
M-ASK: Multi-audio system controller
CCC: Car Communication Computer

NOTE: Option 633 supersedes the old option 638. Option 633 "Basic fittings for mobile phone Business with bluetooth interface" supersedes the old option 638 "Car phone Professional". The cordless handset (SBDH) with option 638 is replaced with the customer's bluetooth mobile phone. The TCU has expanded functions and is not compatible with the TCU of option 638.

Characteristics of option 633:

The control unit (TCU: Telematic Control Unit) allows the following telematic services:
- Telematics (breakdown call, emergency call)
- TeleService
- BMW ASSIST
- BMW Online
The GSM dual band with the frequencies 900 and 1900 MHz guarantee area-wide reception.
Option 613 "Internet-based services" is no longer available. The contents of option 613 are integrated into option 612 "BMW Assist".
Option 633 has its own GPS module for location determination, even if there is no navigation system installed in the vehicle.
The telephone functions can be operated using their own voice recognition system. Vehicles with Car Communication Computer (CCC) need option 620 "Voice recognition system" for speech processing.
Up to 4 signed on bluetooth mobile phones are displayed in a list. From the 5th mobile phone onward, the mobile phone at the bottom of the list is deleted.
The battery is recharged when the mobile phone is placed in the snap-in adapter. The recharging process is electronically regulated. Moreover, the mobile phone is connected to the vehicle's external aerial.

NOTE: The snap-in adapter has to be ordered separately. The base plate is installed ex works. At the customer's request, the snap-in adapter can be retrofitted by the dealer organization.

For more information, refer to E60, E61, E63, E64, E87, E90: BASIC FITTINGS FOR MOBILE PHONE BUSINESS, SYSTEM OVERVIEW .