12 41 Starter motor with mounting
STARTER MOTOR WITH MOUNTING TIGHTENING SPECIFICATION
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Starter motor mounting to crankcase | N52, N52K, N51, N53 | M10x85 | Replace screw | |
| Jointing torque | 20 Nm | |||
| Torque angle | 180 ° | |||
| 2AZ Starter motor mounting to crankcase | N52, N52K, N51, N53 | M10x30 | Replace screw | |
| Jointing torque | 20 Nm | |||
| Torque angle | 90 ° | |||
| 3AZ Battery positive lead to starter | N52, N52K, N51, N53 | M8 | 13 Nm |