52 Plug connections, terminals, loose parts
WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
PLUG CONNECTIONS, TERMINALS, LOOSE PARTS
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Holder, wiring harness, to cylinder head | N52 / N52K / N54 | M6x12 | 8 Nm | |
| 2AZ Cable duct to cylinder head cover | N52 / N52K / N53 / N54 | M6 | Replace screws | 3 Nm + 45 degrees |
| 3AZ Ground cable to crankcase (electr. coolant pump) | N52 / N54 / N52K / N51 / N53 | M8 | Replace screws | 8 Nm + 45 degrees |
| 4AZ Assembly: holder, monitor sensors | N54 | M6x12 | 8 Nm |