16 11 071 Replacing rubber sleeve between fuel filler pipe and fuel tank
Recycling
- Fuel escapes when fuel lines are detached. Have a suitable collecting container ready.
- Catch and dispose of escaping fuel.
- Observe country-specific waste-disposal regulations.
Important
- Ensure adequate ventilation in the place of work!
- Avoid skin contact (wear gloves)!
- Before starting the engine for the first time: Fill fuel tank with at least 5 litres of fuel.
Necessary preliminary tasks:
- Draw off fuel from fuel tank
- Remove right underbody panelling. See 51 47 ... REMOVING AND INSTALLING/REPLACING LEFT OR RIGHT UNDERBODY PANELLING .
Loosen hose clamps (1). Detach rubber sleeve (2) first from fuel filler pipe and then from fuel tank. Installation: Tightening torque 16 12 10AZ, see 16 12 FUEL DELIVERY .