24 00 018 Adjusting Selector Lever (A5S 360R / 390R, A4S 200R, 6HP26Z/19Z)

Grip clamping sleeve (1).

Slacken nut (2).

Press selector lever (3) forwards into park position. Press cable (4) in direction of arrow and release again.

Grip clamping sleeve (1).

Tighten down nut (2).

Tightening torque. Refer to AUTOMATIC TRANSMISSION - TIGHTENING TORQUES .

Fig 1: Identifying Clamping Sleeve, Nut, Selector Lever And Cable

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Move selector lever to "P" position.

Check whether parking gear is engaged by turning propeller shaft.