51 16 204 Removing And Installing/Replacing Rear Cup Holder

Necessary preliminary tasks: 

Specification with normal rear seat: 

• Remove rear seat  . See 52 24 005 REMOVING AND INSTALLING/REPLACING REAR SEAT (NORMAL) .

Specification with normal/electric rear seat: 

• Remove seat middle section  . See 52 25 002 REMOVING AND INSTALLING PADDING FOR LEFT OR RIGHT REAR SEAT .

Release screws (1).

Remove cup holder (2) towards front.

Fig 1: Identifying Cup Holder Screws

Courtesy of BMW OF NORTH AMERICA, INC.