61 31 996 Carry Out Steering Angle Sensor Adjustment
IMPORTANT:
In vehicles with active front steering, steering angle sensor adjustment is integrated in the service function "Initial operation/adjustment for active front steering" and must not be carried out separately!
NOTE:
Steering angle sensor adjustment must be carried out:
- After adjustment work on the front axle/steering.
- After all mechanical work on the steering system.
- After the following components have been replaced/coded:
- Steering column switch cluster.
- DSC control unit.
- ARS control unit.
Connect vehicle to BMW diagnosis system.
Select and carry out steering angle sensor adjustment under Service functions.