34 51 Slip Control System (ABS, ASC+T, DSC)
SLIP CONTROL SYSTEM (ABS, ASC+T, DSC) TIGHTENING TORQUES
| - | Type | Thread | Tightening specification | Measure |
|---|---|---|---|---|
| 1AZ Control unit on hydraulic unit | E46 (MK20) | - | - | 2.6 Nm |
| - | E46/E85/E86/ (MK60) | - | - | 5+1 Nm |
| - | E38/E39/E52/E53/E46 AWD/E65/E66/E67 | - | - | 2.9 Nm |
| - | E60/E61/E63/E64/E83 | - | - | 3 ± 0.3 Nm |
| 2AZ Pressure sensor "V" and "H" to master brake cylinder | E46/E85 | - | - | 25 + 5 Nm |
| Pressure sensor to hydraulic unit | E38/E39 | - | - | 20 Nm |
| - | E52/E53/E46 AWD/E65/E66 | - | Only with special tool 34 1 290 | 19 Nm |
| 3AZ Rotation rate sensor/DSC sensor to holder | E46/E65/E66/E67/E60/E61/E63/E64/E83/E85/E86 | - | - | 8 Nm |
| 4AZ Bracket, rotation rate sensor to body | E46/E85/E86 | - | - | 8 Nm |
| 5AZ Banjo bolt for pre-boost pump intake line to pre-boost pump | E46 | - | - | 20 Nm |
| 6AZ Pulse generator to swivel bearing/wheel carrier | E52/E53/E46/E85/E60/E61/E63/E64/E67 | - | - | 8 Nm |
| - | E39/E38/E65/E66 | - | - | 9 Nm |
| 7AZ Rotation rate sensor to body | E38/E39 | - | - | 8.6 Nm |
| 8AZ Rotation rate sensor to body | E52/E53 | - | - | 8 Nm |
| 9AZ Bracket to hydraulic unit | E52/E53/E46/E85/E86/E83/E60/E61/E63/E64 | - | - | 8 Nm |
| 10AZ Bracket, hydraulic unit to body | E52/E53/E46/E85/E86/E83/E60/E61/E63/E64 | - | - | 8 Nm |
| 11AZ All screws to precharging pump and holder | E52/E53/E46 (M3)/E65/E66 | M6 | - | 8 Nm |
| 12AZ Pressure sensor, front and rear for ACC, to brake line | E60/E61/E63/E64 | - | - | 25 + 5 Nm |