51 12 Rear Bumper
TIGHTENING TORQUE SPECIFICATION - REAR BUMPER
| - | Type | Thread | Tightening specification | Measure |
|---|---|---|---|---|
| 1AZ Bumper to carrier | E31 | M10 | - | 40 Nm |
| - | E32/E34/E36 | M8 | - | 22 Nm |
| - | E34 | M10 | - | 42 Nm |
| 2AZ Bumper / carrier to impact absorber | E36 | M10 | Install bolts with bolt cement. | 45 Nm |
| - | E38 | M12 | - | 45 Nm |
| - | E39 | M10 | - | 45 Nm |
| - | E46 | M10 | - | 41 Nm |
| - | E31/E32/E34/E30/Mod. 88 | M12 | - | 48 Nm |
| - | E52 | M10 | - | 38 Nm |
| - | E53 | M12 | - | 55 Nm |
| - | E85/E86 19 Nm E60/E61/E63/E64 | M10 | - | 36 Nm |
| 3AZ Impact absorber/carrier to body | E30/E24 | - | - | 23 Nm |
| - | E31/E32/E34 | M6 | - | 9 Nm |
| - | E36/E46 | M8 | - | 22 Nm |
| - | E39 | M8 | - | 20 Nm |
| - | E53 | M8 | - | 24 Nm |
| - | E65/E66/E67 | - | - | 38 Nm |
| - | E52/E85/E86 | - | - | 19 Nm |
| - | E60/E61/E63/E64 | M10 | - | 36 Nm |
| - | E83 | M12 | - | 71 Nm |
| 4AZ Bumper to side panel | E30 | - | - | 7 Nm |
| 5AZ Bracket to side panel | E36/E46 | - | - | 3 Nm |
| - | E39 | - | - | 6 Nm |
| 6AZ Holder, bottom, to body | E36 | - | - | 8.5 Nm |
| 7AZ Screw for lower panel | E36 | - | - | 2.5 Nm |
| 8AZ Bumper to tail panel | E60 | M6 | Replace screw with sealing washer | 2.5 Nm |
| 9AZ Guide to side panel | E83 | - | - | 2 Nm |
| - | E61 | - | - | 3 Nm |
| 10AZ Guide to rear trim panel | E83 | - | - | 2.8 Nm |
| - | E61 | - | - | 4.5 Nm |