LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2008 >> 550i Automatic >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Audio, Navigation, Anti-Theft And Restraints - Repair >> Airbag Control Units, Airbag Sensors >> 65 77 016 Removing and installing/replacing airbag control unit

65 77 016 Removing and installing/replacing airbag control unit

WARNING: Note AIRBAG SAFETY INSTRUCTIONS !
Incorrect handling can activate airbag and cause injury.

Necessary preliminary tasks: 

If necessary, remove rear compartment air duct and disconnect associated plug connections.

Disconnect plug connection (1).

Release screws (2) and remove airbag control unit (3).

Tightening torque: 8 Nm

Fig 1: Identifying Screws And Airbag Control Unit
G04761963Courtesy of BMW OF NORTH AMERICA, INC.