51 16 270 Removing and installing complete rear section of rear console

WARNING: This page is about a different car, the 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove REAR SEATS

Release screws (1) under rubber insert.

Release screws (3) on left and right sides.

Disconnect plug connection (4).

Lift out center console (5).

Only release screws (2) on left and right if:

FRONT TRIM, REAR CONSOLE
CUP HOLDER, REAR CONSOLE

Fig 1: Identifying Center Console, Plug Connection And Mounting Screws
Courtesy of BMW OF NORTH AMERICA, INC.

are removed.