61-4320 Crimping tool

WARNING: This page is about a different car, the 2011 BMW X6 and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

0494158 614320 Crimping tool Minimum set: Measuring and testing equipment MP

NOTE: (Crimping set with pliers) For optical fibres and cable repairs. As from 06/2006 extended by universal crimping head 61 4 328, see SI 2 04 06 293. As from 03/2010 61 4 328 will be removed from the set and can be ordered separately under 61 4 340, see SI 02 01 10 615. As from 03/2010 61 4 322 will be replaced by 61 4 329. As from 03/2010 61 4 326 will only be available as a replacement. [Released]

Fig 1: Identifying Crimping Tool (0494158)

Courtesy of BMW OF NORTH AMERICA, INC.

Storage Location

M22 x 201

SI number

01 14 01 (766)

Consisting of:

2 = 0496847 Crimping tool
NOTE: Replaces special tool 61 4 322 as of 03/2010. Can be ordered separately again as of 04/2012. [Released]
8 = 0495555 Crimping tool
NOTE: (Universal crimping head) For crimping contacts (without seal) and cable cross-sections from 0.35 - 2.5 mm, see SI 2 04 06 293. As from 03/2010 61 4 328 will not longer be supplied in set 61 4 320. Order by way of separate special tool number 61 4 340, see SI 02 01 10 615 [Replaced]
7 = 0494320 Supplement
NOTE: (Replacement knife) With tool for changing blades in stripping unit. Must be ordered separately, not included in 61 4 320 delivery specification! Discontinued as from 03/2010, see SI 02 01 10 (615). [Discontinued]
5 = 0494178 Crimping tool
NOTE: (Crimping head) For crimping MPQ contacts [Released]
6 = 0494164 Supplement
NOTE: (Replacement blade) For face-cutting optical fibres. From 03/2006, no longer included in set 61 4 320 but individually available as a replacement set, see SI 02 01 10 (615). Replacement blade only suitable for 61 4 322. [Released]
4 = 0494162 Crimping tool
NOTE: (Crimping head) For crimping MQS contacts [Released]
3 = 0494161 Crimping tool
NOTE: (Crimping head) For crimping optical fibre contacts [Released]
2 = 0494160 Crimping tool
NOTE: (Crimping head) For stripping insulation and cutting optical fibre to length Replaced as from 03/2010 by 61 4 329 (0 496 847), see Service Information 02 01 10 (615). [Replaced]
1 = 0494159 Handle
NOTE: Basic handle for crimping heads [Released]