61 31 038 Removing and installing (replacing) switch for passenger airbag deactivation
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Read and comply with safety regulations
for handling airbag modules and pyrotechnical belt pretensioners.
See. See 72 00.. SAFETY REGULATIONS FOR HANDLING COMPONENTS WITH GAS GENERATORS .
Incorrect handling can activate airbag and cause injury.
See. See 72 00.. SAFETY REGULATIONS FOR HANDLING COMPONENTS WITH GAS GENERATORS .
Incorrect handling can activate airbag and cause injury.
Necessary preliminary tasks:
- Disconnect battery negative lead
- Remove side cover on instrument panel . See 51 45... REPLACING SIDE COVER ON INSTRUMENT PANEL .
Unlock catches (1) and feed out switch for passenger airbag deactivation (2) to front of cover.
Installation:
Make sure switch for passenger airbag deactivation (2) is correctly seated in cover.
Replacement: