32 00... Moving vehicle into normal position
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Check compliance with test conditions , bring vehicle to a stop if necessary.
- Version with air spring system: Carry out ride-height-calibration
- Check vehicle interior and luggage compartment (incl. luggage compartment recess) for load, unload vehicle if necessary
- Introduce DIN load (refer to Technical Data ) into vehicle
- Determine vehicle ride height NOTE: If the vehicle ride height is not inside the tolerance (refer to Technical Data ), the vehicle must be repaired (coil spring/leakage).