62 11 280 Removing and installing (replacing) instrument cluster
IMPORTANT:
Read and comply with NOTES ON PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION)
.
Necessary preliminary tasks:
- Extend steering wheel completely and lower
- Disconnect BATTERY NEGATIVE LEAD .
IMPORTANT:
Risk of damage!
Carry out this operation carefully so as to avoid damaging the instrument panel.
Carry out this operation carefully so as to avoid damaging the instrument panel.
Release screws (1). Tightening torque: 1.5 N.m.
Pull instrument cluster (2) forward slightly in direction of arrow.
Disconnect associated plug connection.
Feed out/unclip associated wiring harness.
Remove instrument cluster (2).
Replacement:
Carry out vehicle PROGRAMMING/CODING .
Check values for Condition Based Service (CBS) and correct if necessary.