32 33 010 Removing and installing/replacing sport steering wheel
NOTE:
Wheel/chassis alignment is not
necessary after the steering wheel has been removed and installed or replaced.
Necessary preliminary tasks:
- Remove AIRBAG UNIT
Move wheels/sport steering wheel into straight-ahead position.
Disconnect plug connection (1).
Release screw (2) and remove sport steering wheel.
Secure volute spring cassette with adhesive tape against twisting.
Installation:
Make sure connecting lead(s) is/are correctly laid.
Tightening torque 32 33 1AZ .
Installation:
Align sport steering wheel using grooved toothing (1) to steering column and attach.
Replacement:
- Remove RETAINING PLATE FOR MULTIFUNCTION STEERING WHEEL SWITCH
- Version with Sequential Manual Gearbox/Transmission: Remove shift paddles. See REMOVING AND INSTALLING/REPLACING LEFT OR RIGHT SHIFT PADDLE FOR SMG TRANSMISSION or REMOVING AND INSTALLING/REPLACING LEFT OR RIGHT SHIFT PADDLE FOR AUTOMATIC TRANSMISSION .
- Version with Lane Departure Warning: Remove LANE DEPARTURE WARNING MOTOR ELECTRICS