Torque Request
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2010 BMW M6, 2010 BMW M5, 2009 BMW M6, 2009 BMW M5, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.
The calculation of the torque request and the actual engine torque is done in the level 2 a second time. If there are too big difference between the two levels of the following variables, the fault code "SG intern Ueberwachung Ebene 2 - Momentenmanager" (P1689) is set:
- Minimum torque
- Maximum torque
- Torque losses
- Relative drivers choice
At least the torque request is compared with the actual level2-torque. If the difference exceeds the limit for a certain time, the fault code is set as well.