51 43 075 Removing and installing / replacing side trim panel, footwell, on A-pillar, right

Necessary preliminary tasks:

Detach mucket on door (1) in area of side trim panel (2).

Unclip side trim panel (2) in direction of arrow from retaining points (3).

Remove side trim panel (2).

Fig 1: Identifying Door, Side Trim Panel And Retaining Points

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

If necessary, lever out clips (1) remaining in bores.

If necessary, replace faulty clips (1).

Position side trim panel (2) preinstalled with clips (1) on associated bores and clip into place.

Fig 2: Identifying Side Trim Panel And Clips

Courtesy of BMW OF NORTH AMERICA, INC.