51 45 310 Removing and installing (replacing) center instrument panel trim (up to 03/2007)

Necessary preliminary tasks: 

• Remove DECORATIVE STRIP ON INSTRUMENT PANEL ON RIGHT 

Release screws (1).

Unclip upper retaining points (3) by pressing screwdriver (2) towards front.

Unclip lower retaining points (5).

Unlock associated plug connections and disconnect.

Remove center trim for instrument panel (4).

Fig 1: Identifying Screws, Instrument Panel And Lower Retaining Points

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

• Remove OPERATOR UNIT FOR HEATER/AIR CONDITIONER
• Remove CENTER CONSOLE SWITCH CENTER