63 25 000 Removing and installing/replacing auxiliary brake light

Unclip cover for auxiliary brake light (1) at points (2) and feed out sideways in direction of arrow.

Remove cover for auxiliary brake light (1) from molded roofliner (3).

Fig 1: Removing Cover For Auxiliary Brake Light

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Clips (1) and locators (2) must not be damaged.

Make sure cover for auxiliary brake light (3) is correctly seated.

Fig 2: Identifying Auxiliary Brake Light, Clips And Locators

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten plug connection (1) and disconnect.

If necessary, unclip plug connections (2) on auxiliary brake light (4).

Unlock slide (3) on both sides and remove auxiliary brake light (4) in direction of arrow from rear window (5).

Installation:

Make sure auxiliary brake light (4) is correctly positioned in rear window (5).

Fig 3: Identifying Plug Connection, Auxiliary Brake Light And Rear Window

Courtesy of BMW OF NORTH AMERICA, INC.