66 54 010 Remove and installing complete night vision camera (from 03/2007)

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION) .

Necessary preliminary tasks:

Drill out rivets (1).

Fig 1: Identifying Rivets

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Secure night vision camera (1) against falling down.

Disconnect plug connection (2) and release screw (3).

Tightening torque 66 54 1AZ .

Fig 2: Identifying Night Vision Camera, Plug Connection And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Secure night vision camera (1) against falling down.

Disconnect hose connection (2) and unclip cable fastener (3).

Fig 3: Identifying Night Vision Camera, Hose Connection And Cable Fastener

Courtesy of BMW OF NORTH AMERICA, INC.

After installation:

Replacement only: