66 54 001 Adjusting night vision camera
NOTE:
Mechanical adjustment - as described in the following - is only possible axially
.
Vertical adjustment can only be carried out with the BMW diagnosis system:
- Service functions
-> Body
-> Night vision
-> Night vision camera
-> Vertical adjustment
Necessary preliminary tasks:
- Remove grille in bumper trim on left. See REMOVING AND INSTALLING/REPLACING GRILLE IN BUMPER TRIM (M5 OR M AERODYNAMIC KIT) or REMOVING AND INSTALLING/REPLACING TRIM GRILLE IN BUMPER TRIM (UP TO 03/2007)
NOTE:
Front of car must be parallel at distance (A) to headlight aiming device (1).
A = 1.5 m
A = 1.5 m
Align a suitable straight object (2), e.g. a spirit level, horizontally on headlight aiming device.
Slowly carry out axial adjustment of night vision camera at adjusting screw (3).
NOTE:
Illustration shows the in-car monitor view.
If necessary, align the picture of the night vision camera with aid of a second person.
Top edge (A) must be aligned parallel to top edge of screen (B).