65 13 188 Removing and installing/replacing rear mid-range speaker (in rear shelf)

Special tools required:

Lever speaker cover (1) with special tool 00 9 341 out of rear shelf (2).

Fig 1: Removing Speaker Cover With Special Tool 00 9 341 Of Rear Shelf

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Lugs (1) and locks (2) of speaker cover (3) must not be damaged.

Make sure speaker cover (3) is fully engaged.

Fig 2: Identifying Lugs, Locks And Speaker Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Remove mid-range speaker (2) upwards from rear shelf (3).

Disconnect associated plug connection and remove midrange speaker (2).

Fig 3: Removing Mid-Range Speaker

Courtesy of BMW OF NORTH AMERICA, INC.