65 77 016 Removing and installing/replacing airbag control unit (build date from 09/2005)
WARNING:
Note AIRBAG SAFETY INSTRUCTIONS
!
Incorrect handling can activate airbag and cause injury.
Incorrect handling can activate airbag and cause injury.
IMPORTANT:
Read and comply with notes on protection against electrostatic damage (ESD protection).
Necessary preliminary tasks:
- Disconnect BATTERY NEGATIVE LEAD
- Remove CENTER CONSOLE
If necessary, remove rear compartment air duct and disconnect associated plug connections.
Disconnect plug connection (1).
Release screws (2) and remove airbag control unit (3).
Tightening torque 65 77 1AZ .