11 36 Variable Camshaft Control
VARIABLE CAMSHAFT CONTROL - TIGHTENING TORQUES SPECIFICATION
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ VANOS with sensor wheel to inlet and exhaust camshafts | N54 | M10 x 94 | Replace screw | |
| Jointing torque | 20 Nm | |||
| Torque angle | 180° | |||
| 2AZ Non-return valve VANOS to cylinder head | N54 | M14 x 1.5 | 13 Nm | |
| 3AZ Solenoid valve holder to cylinder head | N54 | M6 x 12 | 10 Nm |