11 61 Intake manifold
INTAKE MANIFOLD - TIGHTENING TORQUES SPECIFICATION
| Type | thread | tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Intake manifold on cylinder head | All | M8 | 22 Nm | |
| All | M7 | 15 Nm | ||
| All | M6 | 10 Nm | ||
| 2AZ Soundproofing hood to holder | M60/1 / M60/2 / M62 | M6 | 8 Nm |
INTAKE MANIFOLD - TIGHTENING TORQUES SPECIFICATION
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Hexagon screw (1x) Air intake manifold to cylinder head |
N54 | M7 x 50 | 15 Nm | |
| 2AZ Hexagon nut (6x) Air intake manifold to cylinder head |
N54 | AM7 | 15 Nm | |
| 3AZ Hose clamp (1x) Gaiter, rear charge-air duct to front charge-air duct. |
N54 | L65-72 | 3 Nm |