18 20 Exhaust system suspension
EXHAUST SYSTEM SUSPENSION - TIGHTENING TORQUES SPECIFICATION
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Clamp to front pipe holder | N54 | M8 x 49 | 19 Nm | |
| 2AZ Bracket, primary cat., to primary cat. | N54 | BM8 | 19 Nm | |
| 3AZ Front pipe holder to retaining plate | N54 | M8 x 20 | 19 Nm | |
| 4AZ Assembly, exhaust system, to assembly, suspension, rear muffler | N54 | M8 | 19 Nm | |
| 5AZ Assembly, retaining plate, to transfer case | N54 | M8 x 35 | 19 Nm | |
| 6AZ Preliminary pipe bracket to transmission | N54 | M8 x 16 | 19 Nm | |
| 7AZ Assembly, retaining plate to transmission | N54 | BM8 | 21 Nm | |
| 8AZ Exhaust system to front pipe bracket | N54 | BM8 | 21 Nm |