17 51 000 Removing and installing/replacing intercooler
Special tools required:
Necessary preliminary tasks:
- Remove FRONT UNDERBODY PROTECTION
- Unlock charge-air duct on left and right of intercooler and detach
IMPORTANT:
Coat sealing rings of quick-connect couplings with antiseize agent.
Pressure pipes cannot be fitted without antiseize agent.
Pressure pipes cannot be fitted without antiseize agent.
Release screws. (Picture shows right side).
Open quick-connect couplings on charge-air hoses.
Remove intercooler.
Installation:
CAUTION:
Risk of damage
to sealing rings!
Special tool 11 8 670 is essential!
Special tool 11 8 670 is essential!
- Coat sealing rings with antiseize agent.
- Attach charge-air duct (1) with special tool 11 8 670 to intercooler (2).
- Charge-air ducts must audibly snap into place.
Texts refer to and illustrations show the right side. The procedure is identical for the left side.