51 23 Hood/bonnet locks
TIGHTENING TORQUE SPECIFICATIONS - HOOD/BONNET LOCKS
| Type | Tightening specification | Measure | |
|---|---|---|---|
| 1AZ Retaining hook to engine hood/bonnet (replace microencapsulated screws) | E46/ E52/ E53/ E60/ E61 / E63/ E64/ E65/ E66/ E83/ E85/ E86 | 10 Nm | |
| E38 / E39 | 12 Nm | ||
| E36 | Hexagon screw | 10 Nm | |
| Torx bolt | 12 Nm | ||
| 2AZ Lock to body (replace microencapsulated screws) | E36/ E38/ E39/ E46/ E52/ E53/ E60/ E61 / E63/ E64/ E83 | 10 Nm | |
| E65/ E66/ E85/ E86 | 8 Nm | ||
| 3AZ Lock to engine hood/bonnet (replace microencapsulated screws) | E36/ E46/ E52 | 10 Nm | |
| E39 | 12 Nm |