11 61 365 Removing and installing/replacing front left charge air duct (N55): Notes

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove INTAKE PORT .
Remove front UNDERBODY PROTECTION .

Release screw (1).

Tightening torque 17 10 4AZ .

Fig 1: Identifying Screw

G10057957

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock snap fastener (1).

Detach charge air duct (2) from charge air cooler connection (3).

Installation note:

The seal inside the snap fastener must be coated with anti-friction agent.

Charge air duct (2) must snap audibly into place!

Fig 2: Identifying Charge Air Duct, Charge Air Cooler Connection, And Snap Fastener

G10057958

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten hose clamp (2).

Release charge air duct (3) from gaiter (1).

NOTE: Remove charge air duct (3) in upward direction by simultaneously turning anti-clockwise (see Fig 3 of arrow).

Fig 3: Removing Charge Air Duct

G10057959

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.