Diagnostic Overview
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2010 BMW M6, 2010 BMW M5, 2009 BMW M6, 2009 BMW M5, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.
The pressure test runs after each engine start.
The control valves of the inlet camshaft are activated in such a manner that it should move in the opposite direction, with respect to its direction of rotation. If no sufficient change in the opposite direction is detected, within a temperature dependent time, a fault code is stored.