LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2008 >> 528xi Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1653 (Self Diagnosis - Theory & Operation (S85)) >> Misfire Monitoring >> Monitoring Function >> Statistic Fault Protection of Catalytic Converter

Statistic Fault Protection of Catalytic Converter

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2010 BMW M6, 2010 BMW M5, 2009 BMW M6, 2009 BMW M5, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.

The catalytic convert of each engine bank is monitored within an interval of 200 crankshaft revolutions periodically. Misfire detected are weighted (over engine load and revs) and added for each engine bank separately. As soon as the bank sum counter exceeds a predetermined value, an error report for each cylinder with misfire is stored. Additionally, the MIL is switched on immediately and the worst cylinder is switched off (injection off and lambda control switched to open loop). If more then one cylinder did have misfire an error report for multiple cylinder will be stored.

scientia non olet · About LEMON Manuals