LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2008 >> 528xi Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Self Diagnosis - Diagnostic Trouble Codes - DTC P1214 - DTC U1168 (N51, N52) >> BMW MSV80 >> DTC P150B, BMW Hex Code 0x2E8E, BMW Code 11918: Battery Sensor BSD (Bit Serial Data Interface) Communication Circuit (SIG) >> Repair procedures (plant/service)

Repair procedures (plant/service)

  1. Determine whether battery sensor is installed. If not, use SGBD to delete all adaptation data and then switch ignition off/on.
  2. Check continuity in wire connecting DME to battery sensor (BSD_BUS)
  3. Ensure correct fit of battery sensor on battery ground terminal and check seating of all plugs
  4. Replace battery sensor.
scientia non olet · About LEMON Manuals