65 75 071 Removing and installing (replacing) module for passenger compartment sensor
Special tools required:
- 00 9 340 . See MAINTENANCE AND GENERAL INFORMATION - SPECIAL TOOLS .
IMPORTANT:
Read and comply with notes on protection against electrostatic damage (ESD protection)
! See 61 35... NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE)
.
Lever out trim (1) with special tool 00 9 340 and remove.
Disconnect plug connection (1) and remove module for passenger compartment sensor with trim.
Replacement:
Open retaining lugs (2) and remove module (3).
Installation:
Arrow (4) printed on module for passenger compartment sensor must be aligned in direction of arrow.
Replacement:
Carry out programming/coding .