51 16 263 Removing and installing upper rear console trim (long version)

Special tools required: 

• 00 9 340  . See MAINTENANCE AND GENERAL INFORMATION - SPECIAL TOOLS .

Insert special tool 00 9 340  between trim (1) and upper/side rear console.

Unclip trim (1) towards rear from retainers (2) and feed out.

Fig 1: Uncliping Trim Towards Rear From Retainers

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Clips (1) must not be missing or damaged.

Fig 2: Identifying Clips

Courtesy of BMW OF NORTH AMERICA, INC.