72 11 092 Removing and installing/replacing rear left or right seat belts (convertible)

Necessary preliminary tasks:

Release screw (2).

Tightening torque: see 22AZ in 72 11 SEAT BELTS .

Remove inertia reel unit (2).

Installation:

Pin (3) determines the installation position and prevents the anchor fitting from turning.

Fig 1: Screw, Seat Belt And Pin

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1).

Tightening torque: see 24AZ in 72 11 SEAT BELTS .

Remove reversing clip (2).

Fig 2: Identifying Reversing Clip And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1).

Tightening torque: see 21AZ in 72 11 SEAT BELTS .

Remove inertia reel unit (2).

Installation:

Inertia reel is coded to prevent incorrect installation.

Fig 3: Identifying Inertia Reel Unit And Screw

Courtesy of BMW OF NORTH AMERICA, INC.