72 12 000 Removing and installing or replacing airbag module on passenger side

WARNING: Read and comply with safety regulations for handling airbag modules and pyrotechnical belt pretensioners.
Incorrect handling can activate airbag and cause injury.

Necessary preliminary tasks:

Disconnect battery negative lead
Remove glove compartment

Unlock plug connections (1) and disconnect.

NOTE: Secure airbag module against falling out.

Unscrew nuts (2).

For tightening torque refer to 72 12 01AZ in 72 12 AIRBAG MODULES .

Remove airbag module in downwards direction.

Fig 1: Plug Connections And Nuts

Courtesy of BMW OF NORTH AMERICA, INC.