61 31 996 Carry out steering angle sensor adjustment

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: In vehicles with active front steering, steering angle sensor adjustment is integrated in the service function "Initial operation/adjustment for active front steering" and must not be carried out separately!

NOTE: Steering angle sensor adjustment must be carried out:

after adjustment work on the front axle/steering
after all mechanical work on the steering system
after replacement / coding / programming of the following components:
- Fixture for switches of steering column / switch cluster / steering angle sensor
- Dynamic Stability Control (DSC) control unit
- Control unit active anti-roll stabilization (ARS)

Connect vehicle to BMW diagnosis system or Software Service Station.

Select and carry out steering angle sensor adjustment under Service functions.