72 11 092 Removing and installing/replacing rear left or right seat belts (coupe)

Necessary preliminary tasks:

Removing left or right inertia reel unit:

Release screw (1) on inertia reel unit (2).

For tightening torque refer to 72 11 21AZ in 72 11 SEAT BELTS .

Remove inertia reel unit (2).

Installation:

Pay attention to coding.

Fig 1: Screw And Inertia Reel Unit

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (2).

For tightening torque refer to 72 11 22AZ in 72 11 SEAT BELTS .

Remove seat belt (1).

Installation:

Pin (3) determines the installation position and prevents the anchor fitting from turning.

Fig 2: Screw, Seat Belt And Pin

Courtesy of BMW OF NORTH AMERICA, INC.