11 37 010 Removing and installing/replacing intermediate levers (N51): Notes

No  steel screws/bolts may be used due to the threat of electrochemical corrosion.

A magnesium crankcase requires aluminium screws/bolts exclusively.

Aluminium screws/bolts must be replaced each time they are released  .

Aluminium screws/bolts are permitted with and without color coding (blue).

For reliable identification:

Aluminium screws/bolts are not magnetic  .

Jointing torque and angle of rotation must be observed without fail (risk of damage). 

Establish size of gates. 

Version 1: Size 55.2 mm 

Version 2: Size 58 mm