LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2007 >> Z4 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2768 (Crankshaft Seal, Timing Case Cover, Engine Oil Pan, Crankcase Ventilation System - Repair - F12) >> Crankcase Ventilation System >> 11 15 003 Replacing engine crankcase ventilation line for cylinders 5-8

11 15 003 Replacing engine crankcase ventilation line for cylinders 5-8

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2018 BMW M6, 2018 BMW 650i xDrive, 2018 BMW 650i, 2018 BMW 640i xDrive, and 2018 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

Release clamp (1).

Tightening torque 13 71 8AZ .

Bend the charge air pipe (2) slightly to the side.

Check the gasket on the exhaust turbocharger. replacing if necessary.

Fig 1: Identifying Left Side Charge Air Pipe, Hose And Clamp
G10042083Courtesy of BMW OF NORTH AMERICA, INC.

Version 1: 

  1. Unlock the retainer.
  2. Pull off the retainer together with the line.
    Fig 2: Unlocking Retainer And Pulling Off Connecting Line
    G10042084Courtesy of BMW OF NORTH AMERICA, INC.

Version 2: 

Pull the line (1) gently in the direction indicated by the arrow.

At the same time, use a screwdriver (3) to unlock the latch mechanisms (2) one after the other.

Pull the connecting line off the clean air pipe and engine crankcase ventilation line.

Fig 3: Pulling Connecting Line Off Clean Air Pipe And Engine Crankcase Ventilation Line
G10042085Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1).

Tightening torque 13 71 1AZ .

Pull clean air pipe (2) from exhaust turbocharger.

Fig 4: Identifying Clean Air Pipe And Screw
G10042086Courtesy of BMW OF NORTH AMERICA, INC.
  1. Unlock the retainer.
  2. Pull off the retainer together with the line.
    Fig 5: Unlocking Retainer And Pulling Off Ventilation Line
    G10042087Courtesy of BMW OF NORTH AMERICA, INC.

Version 1: 

  1. Unlock the retainer.
  2. Pull off the retainer together with the line.

Extract the crankcase ventilation line.

Fig 6: Unlocking Retainer And Pulling Off Engine Ventilation Line
G10042088Courtesy of BMW OF NORTH AMERICA, INC.

Version 2: 

Pull the line (1) gently in the direction indicated by the arrow.

At the same time, use a screwdriver (3) to unlock the latch mechanisms (2) one after the other.

Pull the connecting line off the clean air pipe and engine crankcase ventilation line.

Extract the crankcase ventilation line.

Fig 7: Unlocking Latch Mechanisms And Pulling Off Engine Ventilation Line
G10042089Courtesy of BMW OF NORTH AMERICA, INC.