62 11 280 Removing and installing (replacing) instrument cluster

NOTE: Extend steering column completely and set in downward position.

Release screw (1).

Fold back instrument cluster (2) in direction of arrow and pull out towards rear.

Unlock associated plug connection and disconnect.

Remove instrument cluster (2).

Fig 1: Removing Instrument Cluster

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Retaining lugs (1) of instrument cluster (2) must be exactly seated in mountings of instrument panel.

Fig 2: Identifying Retaining Lugs

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out coding/programming.

Observe following IDC specifications:

Programming
Coding
If necessary, car & key memory
CD "CIP"

Fig 3: Observing IDC Specification
Courtesy of BMW OF NORTH AMERICA, INC.