51 13 115 Removing and installing/replacing cowl panel cover

Necessary preliminary tasks:

Slacken screws (1) on electronics box cover (2).

Remove cover (2).

Fig 1: Removing Electronics Box Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Release cable from cable holder (1).

Remove clip (2).

Removing cowl panel cover

Fig 2: Removing Cowl Panel Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

If necessary, replace defective grommets (1).

Check holder (2) for correct seating.

Fig 3: Replacing Defective Grommets

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Clips (1) must not be missing or damaged.

Fastening clips (2) must not be damaged.

Fig 4: Locating Fastening Clips

Courtesy of BMW OF NORTH AMERICA, INC.