51 41 019 Removing and installing/replacing door handle on door trim panel, front left or right
Necessary preliminary tasks:
- Remove Cover On Door Handle .
Loosen screws (1).
Installation:
Tightening torque, see 51 41 2AZ in BODY EQUIPMENT - TIGHTENING TORQUES .
Replacement only:
Loosen screws (1).
If necessary, lever out lock (2) and detach lamp (3).
Detach door handle (4) from door trim and if necessary feed out cable.
Installation:
Tightening torque, see 51 41 8AZ in BODY EQUIPMENT - TIGHTENING TORQUES .
Installation:
Following parts on door handle (4) must not be damaged or missing:
- Bores for screw connection
- Bore for light
- Sleeves